與其他配件相比，輪胎可謂是全自動上料攪拌車所有部件中較易磨損且磨損程度較嚴重的一個。因輪胎的性能狀態會直接影響到自動上料攪拌車的正常使用和運行的綜合效益，所以，一旦輪胎出現破損的問題就需要及時進行維修。下面就由我司技術人員來給大家簡單講解下全自動上料攪拌車輪胎破損時的正確處理辦法。

　　Compared with other accessories, the tire can be said to be one of the most easily worn and seriously worn parts of the automatic charging mixer. Because the performance of the tire will directly affect the normal use and comprehensive benefits of the operation of the full-automatic charging mixer, once the tire is damaged, it needs to be repaired in time. The following is my company's technical personnel to give you a simple explanation under the full-automatic feeding mixer tire damage when the correct treatment.

　　通常來說，自動上料攪拌車承重較多，并且路況大都都很差，簡單發生輪胎被路上異物、尖利物品割傷劃傷的表象，高溫時作業對于混凝土攪拌車輪胎而言也是一大檢測，下降其運用壽命不說，爆胎也時有發生。如今輪胎都比較貴，若是僅僅一個很小的裂口的話，能夠修正，能省不少錢，不過若是是裂縫較大而為了安全思考的話，較佳仍是換新胎。那么，修補師傅是如何解答的呢？

　　In terms of high temperature, it is easy to say that when the tire is scratched by high temperature, it is easy to say that when the tire is scratched by high temperature, it is not easy to say that when the tire is scratched by high temperature. Nowadays, tires are more expensive. If there is only a small crack, it can be corrected and a lot of money can be saved. However, if there is a big crack and for the sake of safety, it is better to replace it with a new one. So, how does the mender answer it?
              

　　關于修補工來說，若是修補沒有經驗，都是先用廢舊輪胎做試補，修補自動上料攪拌車輪胎時常常查看補胎機溫度是不是正常，氣囊壓力是不是正常。運用打磨機時須帶上防護眼鏡；打磨時握緊打磨機輕打避免反彈。下面是自動上料攪拌車補輪胎的詳細步驟，我們能夠參閱一下：

　　As for the repairman, if he has no experience in repairing for the first time, he will first use the waste tire for trial repair. When repairing the full-automatic charging mixer tire, he often checks whether the tire repair machine temperature is normal and whether the air bag pressure is normal. Wear protective glasses when using the grinder; hold the grinder tightly and hit gently to avoid rebound. The following is the detailed steps of tire repair for the full-automatic feeding mixer, which we can refer to:

　　先涂刷膠水，等膠水陰干，胎內貼上橡膠及簾子布，然后壓實壓緊，謹防空氣夾入，接下來選用與輪胎巨細共同的補胎氣囊，輪胎外側創傷有必要縫合，縫合后填充補胎生膠。要注意一點的是，補胎生膠填充高于胎面有些2-3毫米。下面是用擴胎器將輪胎闊開，將氣囊裝入編制帶或涂改滑石粉后，裝入輪胎，放入上模，并在上模與下模加放鐵皮，在氣囊上方放入橡膠板(便宜)，然后放入維護氣囊的鐵板，放入壓鐵，裝好絲杠。旋緊兩頭絲杠，將輪胎趕緊。要盡量保障輪胎與模具嚴密貼合，如不貼合，請松開絲杠及壓鐵，從頭調整。較終將硫化出的剩余橡膠割掉，保障自動上料攪拌車胎面平坦。

　　First, brush glue, wait for glue to dry in the shade, paste rubber and cord fabric inside the tire, and then compact and compact it to avoid air entrapment. Next, use the tire repair air bag which is the same as the tire size. It is necessary to suture the external trauma of the tire, and fill the tire with raw rubber after stitching. It should be noted that the raw rubber filling is 2-3 mm higher than the tread. The next step is to use the tire expander to open the tire. After the airbag is loaded into the braided belt or coated with talcum powder, the tire is loaded into the upper mold, and the iron sheet is placed in the center of the upper mold and the lower mold, and the rubber plate is placed above the air bag (cheap), and then the iron plate for maintaining the air bag is put in, and the lead screw is installed. Tighten the two lead screws, and make the tire quickly. Try to ensure that the tire fits tightly with the mold. If it does not fit, please loosen the lead screw and iron and adjust from the beginning. Finally, the remaining vulcanized rubber is cut off to ensure the smooth tread of automatic feeding mixer.

　　總之，對于全自動上料攪拌車車輛輪胎，我們不僅需要明確輪胎磨損出現的原因，更重要的是要結合實際生產情況選擇合適的措施進行管理，并在輪胎出現嚴重損壞時正確加以維修，以爭取不斷降低各因素對輪胎造成的影響，進而提高車輛運行的效率。

　　In a word, for the tires of full-automatic charging mixer, we not only need to clarify the causes of tire wear, but also select appropriate measures to manage them according to the actual production situation, and properly repair the tires when they are seriously damaged, so as to continuously reduce the impact of various factors on the tires, and then improve the efficiency of vehicle operation.