The fully automatic feeding mixer is a kind of vehicle commonly used in the construction industry at present. Some problems should be paid attention to before and after the vehicle is driven.
1、 Inspection content before departure:
1. Obey the traffic laws and regulations. Don't drink and drive.
2. Check whether the driver's license, driver's license and some documents are complete.
3. Check whether the engine, engine oil, diesel oil, water and battery fluid are sufficient.
4. Check whether the hydraulic oil and drum power are normal.
5. Check whether the tire pressure and steel plate screws are loose.
6. Check whether the lighting instrument, horn, air pressure, steering mechanism, foot brake and hand brake are safe and effective.
7. After the pump truck enters the site, observe the terrain first. The stable pump field must be flat and hard, free of obstacles and high-voltage wires, and easy to access by tank trucks. When lifting the arms, make sure the legs are secure.
2、 Inspection content after receiving:
1. Clean the body and roller sundries.
2. Clean the battery and cab.
3. Release the water in the oil tank, pull the brake and lock the door.
4. Add gasoline and diesel to prepare for the next shift.
5. When the pump truck is completed or needs to be transferred, the boom shall be folded orderly, placed on the bracket, and the leg shall be fully retracted and locked.
The fully automatic feeding mixer must not be drunk before the driver drives. This is for his own safety and the safety of others.
The above is the precautions before and after the car is put out for you. If you want to know more about the mixer products, please visit the website: http://www.phonebynet.net